Standalone PCM Recorder with Camera Mount
The TASCAM DR-60DmkII Portable Recorder is an unbeatable solution for field capture, especially when it comes to video production. From just four AA batteries (or an optional battery pack), the DR-60DmkII captures up to four channels in stunning 24-bit/96kHz quality directly onto its SD/SDHC/SDXC storage. Mount it under or over your DSLR and connect lavs, shotguns, and bias mics, or route your studio condensers and dynamic microphones into the DR-60DmkII's low-noise, +64dB phantom powered HDDA mic preamps. You get independent level knobs for each input source, as well as dual recording to capture the same audio source at different levels. The TASCAM DR-60DmkII portable recorder also comes loaded with plenty of video-centric features, including slate and transport controls, a 3-way low-cut for trimming mud, and a master limiter for preventing overages. You also get a Camera In/Out audio pass-through to monitor camera audio from the TASCAM or to route the DR-60DmkII's audio directly into your camera. A backlit 128 x 64 LCD gives you access to all essential settings and features on location. Once back home, the TASCAM DR-60DmkII's USB 2.0 connection provides you with stable power and simple file transfer into your laptop for editing and storage.
TASCAM DR-60DmkII Portable Audio Recorder Features:
- 4-track 24-bit/96kHz portable audio recorder
- Tailored for DSLRs and single-shooter cameras
- Small form factor — mounts directly onto your camera
- Records audio onto SD/SDHC/SDXC cards up to 128GB
- Powered by 4 AA batteries, optional BP-6AA battery pack (not included), or included USB cable
- 2 low-noise HDDA mic preamps with phantom power, plug-in power, and +64dB of gain
- Rugged Neutrik combo XLR/TRS inputs
- Hands-on level controls for all audio inputs
- Dual recording can capture the same sound source at different levels
- 1/8-inch stereo input for channels 3–4
- 1/8-inch camera audio in and out
- 1/8-inch headphone jack for monitoring
- Slate and transport controls
- Onboard low-cut and limiter functions
- USB 2.0 connection for file transfer
- Backlit 128 x 64 LCD is easy to read in dim lighting conditions
- RC-3F footswitch and RC-10 wired remote support